This Christmas candlestick arrangement is small enough for a console or buffet, and tall enough to look like you meant it. I built it on a candlestick base with layers of evergreen, red velvet magnolia, juniper berries, and a pair of red cardinals. It adds height and a finished look without taking up much room.
If you love a pulled-together Christmas table without the fuss, this one is for you. Here’s exactly how I made it.
Watch the Full Tutorial
I filmed every step, including the parts where I change my mind halfway through. If you’re new here, come subscribe so you don’t miss the next one. New tutorials go up on Sundays.

Supplies for a Christmas Candlestick Arrangement
Everything below is in the shop. I listed them in the order I use them.
- Distressed Cream Metal Candle Holder for the base
- Spray foam (gaps and cracks style) or floral foam, plus Spanish moss for the top
- Cypress Norfolk Pine Bush for the drapey base layer
- Soft Touch Mini Fir Spray for a real-touch texture
- Arborvitae Greenery Spray to fill and shape
- Red Velvet Magnolia Stem, two stems for this design
- Red Cardinal Pick, one or two for the stars of the show
- Oregon Juniper Berry Bush, I used two
- Solid red velvet ribbon (alternate)
- Floral pins, a wooden floral pick, hot glue, and a stem cutter
You can shop all of it at tctcrafts.com, or browse the Christmas floral and greenery collection to mix in your own favorites.
As an Amazon Associate I earn from qualifying purchases.
How to Make a Christmas Candlestick Arrangement
Step 1: Build your base
My candlestick is about 7 1/2 inches tall. I added a little spray foam in the top for extra height, then covered it with Spanish moss. Floral foam works too if you’d rather use that.
My tip: keep the foam low. I only had about an inch or less in there, so I glued everything well and used pins for backup.
Step 2: Drape the greenery
Cut your cedar and Norfolk pine bush into sections. I kept some clustered on purpose, because I wanted that drapey look hanging off the sides.
Dip a floral pin in glue, slide it through the greenery, and pin it so it lies flat and drapes. This saves you from adding a pick for every piece. You can drape the sides only, or go all the way around like I did.
Step 3: Make the bow
I used a plain red velvet ribbon with four small loops. My loops were about 5 1/2 inches. I didn’t want a big bow here.
Tie it off, then twist a pipe cleaner around a wooden floral pick and glue the bow into the front gap you left. A long pick gives you room to tuck greenery under the bow later. I cut the ribbon tails off for now and add them back at the end, because they get in the way.
Step 4: Add the magnolia and the cardinal
Cut the magnolia stems down. They have thick wire, so a heavy-duty stem cutter makes it much easier.
Place your first cardinal close to the bow so he gets noticed. I snipped a little hole in the foam, slid the pick in, and added glue and a pin. I ship these arrangements, so I always secure everything twice.
I used two magnolia blooms. I usually work in odd numbers, but on a small design like this, two was plenty.
Step 5: Tuck in the magnolia leaves
The velvet magnolia leaves feel a bit like foam, and I’m not a huge fan of them on their own. I tucked them underneath the bloom, and they blend right in.
Step 6: Layer in more greenery
Now add real-touch fir, arborvitae, and more Norfolk pine. Mix the textures and fan the pieces out. Let some greenery grow right through the bow loops so it covers your pipe cleaner and looks like it all grew together.
Step 7: Add the juniper berries
This is where the red comes in. Cut your juniper bush into small pieces and tuck them in wherever you see a hole. Up, down, around, all through the design.
My tip: bend each stem into a little U before it goes into the pick machine. The pick has something to grab, so it won’t slide right off.
This juniper bush is on the plastic side. Blended with the fir and Norfolk pine, it looks beautiful. If a stem looks a little plasticky on its own, mix it in with other textures and it works.
Step 8: Finish the back and add the tails
I treat this as a forward-facing design, but I still fill the back so it looks nice from any angle. Add your ribbon tails back in last, and drape a little greenery over them. I like greenery flowing over ribbon.
Design Tips and Easy Ways to Change It
- Photograph it before you call it done. Pictures show you exactly where the shape needs a fix.
- Blend your greenery. Three textures look richer than one.
- Keep it low and tight. Short stems keep the design from getting top-heavy.
- Cover your mechanics. Greenery through the bow hides the pipe cleaner and pick.
Want a different look? Here’s what I’d try.
- Swap the ribbon for plaid or cardinal print.
- Tuck in a pinecone or two, like I did in the finished piece, or add a glitter spray to glam it up.
- Use snowy greenery for a winter white version.
- Skip the second cardinal for a simpler look. In the video I started with one and played with a second before deciding, and my finished piece has two.
- Change the focal piece and keep everything else the same.
The Finished Piece


Make it for your own home, or shop this design here: https://tctcrafts.com/collections/new-arrivals/products/red-cardinal-christmas-candlestick-arrangement-with-velvet-magnolias-farrisilk-bow-2209
This arrangement is perfect on a dining table, entryway, mantel, or holiday buffet. If you want more ideas for that spot, my post on buffet table decor ideas shows how I style one, and my Williamsburg Christmas decor post has more ways to bring in greenery and fruit.
Shop the Look
Ready to make your own Christmas candlestick arrangement? Start here.
You can also browse the full Christmas collection for more ribbon, picks, and greenery.
Your Turn
Pick your birds, pick your ribbon, and make it yours. You are the artist.
Before the season gets busy, grab my free Seasonal Decor Planning Checklist so you know what to buy and when to put it out. And tell me in the comments: one cardinal or two?
